Robotic knee replacement
In a robotic knee replacement, a robotic arm helps the surgeon carry out a plan made from a CT scan of your knee. The surgeon still performs the operation: the robot guides the bone cuts. Dr Frank Connon uses robotic assistance for every partial knee replacement and for some total knee replacements, and 3D-printed guides for others. Australian registry data link robotic guidance with fewer repeat operations after partial knee replacement. For total knee replacement, large studies have so far found no difference in how long the knee lasts.
Key facts
- What it is
- A knee replacement in which a robotic arm guides the bone cuts to a plan made from a CT scan. Dr Connon performs the operation throughout.
- When it is used
- For every partial knee replacement, and for total knees where Dr Connon judges it the better way to carry out your plan. Otherwise he uses 3D-printed guides.
- What the evidence shows
- Partial knee: fewer repeat operations with robotic guidance on the Australian registry. Total knee: more precise implant positioning, but so far no difference in pain, function or how long the knee lasts.
- Recovery
- The same as any knee replacement through the same approach: usually 1 to 2 nights in hospital, and normal life by 6 to 12 weeks.
- Cost
- You receive a written quote, including any out-of-pocket costs, before surgery. There is no separate charge for robotic assistance.
- Where it is done
- Our team will confirm the hospital when your surgery is booked. Appointments are at our Noosaville and Birtinya rooms.
What is robotic knee replacement?
“Robotic knee replacement” is short for robotic-assisted knee replacement. It is still a knee replacement: the worn surfaces of the joint are removed and replaced with metal and plastic parts. What changes is how the bone cuts are made.
- A plan from your CT scan. Before surgery, a CT scan of your leg is turned into a 3D model of your knee. Dr Connon uses it to plan the size and position of your implants.
- Tracking your knee. In theatre, small tracking pins are placed in your thigh bone and shin bone. Cameras follow them, so the computer knows exactly where your knee is, even as it moves.
- Checking the plan against your knee. Dr Connon moves your knee through its range while the system measures how tight or loose the ligaments are. He can fine-tune the plan before any bone is cut.
- Guided bone cuts. A robotic arm guides the saw so each cut matches the plan. It keeps the saw inside the planned area and stops it if it moves outside (“haptic boundaries”).
Dr Connon controls the instruments throughout. The robot doesn’t operate; it guides. The implants are the same kinds of metal and plastic parts used in any knee replacement.
When does Dr Connon use robotic assistance?
Partial knee replacement. Every partial knee replacement Dr Connon performs is robotically guided. A partial knee replacement resurfaces only the worn part of the knee, so the implant is small and its position matters. This is where the evidence for robotic guidance is strongest: see what the evidence shows.
Total knee replacement. Every total knee replacement is planned from a CT scan and a standing X-ray of your leg, using principles of kinematic alignment: positioning the implants to restore your knee to its alignment before arthritis developed. The plan is then carried out with either robotic assistance or 3D-printed patient-specific guides. Which suits you depends on your anatomy, the pattern of arthritis, your activities and other factors. Dr Connon will explain what he recommends for your knee, and why.
“I have extensive experience with robotic assistance but do not wish to oversell its benefits. I will discuss which approach is best for your circumstances at your appointment.”
Robot or 3D-printed guides: what’s the difference?
Both are ways of carrying out a plan made from a CT scan of your knee. The table sets them side by side.
| Robotic assistance | 3D-printed guides | |
|---|---|---|
| The plan | Made from a CT scan of your knee before surgery | Made from a CT scan of your knee before surgery |
| How the plan reaches the bone | Tracking pins and cameras tell a computer where your knee is, and a robotic arm guides each cut | Guides made to fit the surface of your own bones show exactly where to make each cut |
| Changes during the operation | Ligament tension is measured and the plan can be adjusted on screen before the cuts | Your operation is planned in 3D before surgery. Dr Connon checks the alignment and balance of the knee during the operation and can adjust as required |
| Extra steps | Tracking pins in the thigh bone and shin bone, and time to set up the system in theatre | The guides are made after your CT scan, so the scan is done a few weeks before surgery |
| How long a total knee lasts | No difference between the two on the Australian registry [1] | |
What does the evidence show?
Partial knee replacement
In 2025, 57% of partial (unicompartmental) knee replacements in Australia were done with robotic assistance. The national joint registry found that, from about three and a half years after surgery, robotically assisted partial knees were revised less often than those done with traditional instruments (manual cutting guides). [1] A revision is a repeat operation to replace part or all of the implant. By 5 years, about 4.4 in 100 robotically assisted partial knees had been revised, compared with about 5.2 in 100 done with traditional instruments. [1]
Total knee replacement
In 2025, robotic assistance was used in 45% of total knee replacements in Australia. [1] The research so far shows:
- Implant position. A review of 12 randomised trials, with 2,200 patients, found robotic assistance placed implants closer to the planned alignment, with fewer falling outside the target range. [2]
- Pain and function. The same review found little or no difference in patient-reported pain and function, or in how far the knee bends. [2] An Australian randomised trial of 303 patients, run with the national joint registry, compared robotic-assisted with computer-assisted knee replacement. Robotic assistance did not give better results up to 2 years after surgery. [3]
- How long the knee lasts. The Australian registry found no difference in revision rates between robotic assistance and traditional instruments overall, although in people aged 65 and over the rate was higher with robotic assistance. When it compared robotic assistance, 3D-printed guides, computer navigation (a computer tracks the knee, with no robotic arm) and traditional instruments in knees with modern plastic bearings (the insert between the metal parts), it found no difference between any of them. [1] A study of UK National Joint Registry data, published in The BMJ in 2026, also found no difference in revision rates between robotic and conventional knee replacement in the first few years. [4]
In short, robotic assistance is a precise way of carrying out a plan. It has not yet been shown to make a total knee replacement feel better or last longer than other accurate methods. The Australian registry has recorded robotic total knee replacements only since 2016, so longer-term results are still to come.
What happens on the day?
The anaesthetic and the implants are the same as for any knee replacement. For a total knee replacement, Dr Connon uses the quadriceps-sparing “subvastus” approach whether or not the robot is used. The incision for a partial knee replacement is marginally shorter, and the quadriceps tendon is also left uncut.
For a total knee replacement, the tracking pins in the thigh bone are placed through the main incision, and the pins in the shin bone through separate keyhole incisions. For a partial knee replacement, the pins in both bones go through separate keyhole incisions. These are a few millimetres long and heal with the main wound. The pins are removed at the end of the operation.
You’ll be asleep or sedated, so you won’t see or hear the robot.
Recovery
Recovery depends on the operation and the surgical approach, not on the robot. After a total knee replacement, most people stay 1 to 2 nights in hospital, can walk everyday distances by 6 weeks and resume normal life by 6 to 12 weeks. For the first 6 weeks you’ll have a maximum daily step count, because walking less at first keeps swelling down. Recovering from knee replacement explains the step limits and exercises.
After a partial knee replacement, hospital stays are about a day shorter on average, and some studies show a quicker return to work and sport. [5] The step limit is higher than after a total knee replacement; follow the guide you’re given.
Are there extra risks?
The risks of knee replacement are the same with or without a robot. Two things are specific to robotic assistance:
- Tracking pins. The pins leave small holes in the bone, which heal. Problems with the pins are uncommon. [6]
- A CT scan. Planning needs a CT scan, which uses a small dose of X-rays. Dr Connon’s 3D-printed guides are also planned from a CT scan, so this is the same whichever technique is used.
All surgery carries risks. Dr Connon will discuss them with you, and review your medicines and medical history, before you decide.
What does it cost?
With private health insurance, knee replacement needs Gold hospital cover, or a Silver Plus policy that includes joint replacement. We’ll give you a written quote, including any out-of-pocket costs, before surgery. The quote covers the way your operation is planned, including robotic assistance, so there is no separate charge for the robot.
Without insurance, a self-funded total knee replacement currently costs approximately $27,000 to $28,000 in total, depending on your hospital stay and general health. A partial knee replacement is quoted individually. See self-funded hip and knee replacement.
Common questions
Does the robot do the operation?
No. Dr Connon performs the operation and controls the instruments throughout. The robotic arm guides the bone cuts so they match the plan made from the CT scan of your knee.
Is robotic knee replacement better?
Not automatically. For partial knee replacement, Australian registry data show fewer repeat operations with robotic guidance. For total knee replacement, studies show more precise implant positioning, but so far no difference in pain, function or how long the knee lasts compared with other accurate methods.
Is recovery faster after robotic knee replacement?
Recovery depends mostly on the operation and the surgical approach, not on the robot. Randomised trials have found little or no difference in pain and function between robotic and conventional total knee replacement. Dr Connon uses the quadriceps-sparing “subvastus” approach for total knee replacement with or without the robot.
Will I have extra scars from the robot?
Yes, small ones. For a total knee replacement, the tracking pins in the thigh bone are placed through the main incision, and the pins in the shin bone through separate keyhole incisions. For a partial knee replacement, the pins in both bones go through separate keyhole incisions. These are a few millimetres long and heal with the main wound.
Can I ask for a robotic knee replacement?
Yes. Tell Dr Connon what matters to you. He will explain which technique he recommends for your knee and why, and you make the decision together.
Does robotic knee replacement cost more?
With Dr Connon on the Sunshine Coast, you receive a written quote, including any out-of-pocket costs, before surgery, whichever technique is planned. There is no separate charge for robotic assistance.
References
- Australian Orthopaedic Association National Joint Replacement Registry. Hip, Knee and Shoulder Arthroplasty: 2026 Annual Report. Adelaide: AOA; 2026. Tables KP28 (partial knee) and KT72, KT73 and KT76 (total knee). registry.aoa.org.au
- Ruangsomboon P, Ruangsomboon O, Pornrattanamaneewong C, Narkbunnam R, Chareancholvanich K. Clinical and radiological outcomes of robotic-assisted versus conventional total knee arthroplasty: a systematic review and meta-analysis of randomized controlled trials. Acta Orthop. 2023;94:60–79. doi:10.2340/17453674.2023.9411
- MacDessi SJ, Wernecke GC, Ghadirinejad K, et al. Robotic-assisted surgery and functional alignment in total knee arthroplasty: the RASKAL registry-nested 2 × 2 factorial randomized trial. Bone Joint J. 2026;108-B:622–633. doi:10.1302/0301-620X.108B.BJJ-2025-1472.R2
- Mohammad HR, Judge A, Griffin X, Murray DW. Early national comparison of robotic versus conventional knee replacements for arthritis using National Joint Registry data: target trial emulation study. BMJ. 2026;394:e100691. doi:10.1136/bmj-2026-100691
- Wilson HA, Middleton R, Abram SGF, et al. Patient relevant outcomes of unicompartmental versus total knee replacement: systematic review and meta-analysis. BMJ. 2019;364:l352. doi:10.1136/bmj.l352
- Thomas TL, Goh GS, Nguyen MK, Lonner JH. Pin-related complications in computer navigated and robotic-assisted knee arthroplasty: a systematic review. J Arthroplasty. 2022;37(11):2291–2307. doi:10.1016/j.arth.2022.05.012
This page is general information based on Dr Frank Connon’s patient information. It isn’t a substitute for advice about your own situation. All surgery carries risks, and outcomes vary between people.
Related
Knee replacement
Total and partial knee replacement with Dr Frank Connon using the quadriceps-sparing “subvastus” approach: suitability, planning, recovery, risks, costs.
About knee replacementRecovering from knee replacement
Why walking less helps after knee replacement, your daily step limit, the six key exercises, pain relief, swelling, wound care and when to call.
Read the recovery guideHow long will my new hip or knee last?
What the 2026 national joint registry report shows about how long hip and knee replacements last, and what affects it.
Read the articleMake an appointment
Ready to talk about your hip or knee?
Ask your GP for a referral to Dr Frank Connon, or book our nurse practitioner without one. We’ll find a time at whichever rooms suit you.
- Phone
- 07 5413 4300
- Fax
- 07 5238 8022
- Office hours
- Monday to Friday, 9am to 4.30pm
Closed on public holidays. We aim to return voicemails the same business day.